初始化提交

arduino-cli/libraries/LM75A_Soft/LM75A_Soft.cpp

@@ -0,0 +1,104 @@
+/*
+ * \brief I2C LM75A_Soft temperature sensor library (implementation)
+ *
+ * \author Quentin Comte-Gaz <quentin@comte-gaz.com>
+ * \date 8 July 2016 & 14 January 2018
+ * \license MIT License (contact me if too restrictive)
+ * \copyright Copyright (c) 2016 Quentin Comte-Gaz
+ * \version 1.1
+ */
+
+#include "LM75A_Soft.h"
+#include <SoftwareWire.h>
+
+namespace LM75A_SoftConstValues
+{
+
+const int LM75A_Soft_BASE_ADDRESS = 0x48;
+
+const float LM75A_Soft_DEGREES_RESOLUTION = 0.125;
+
+const int LM75A_Soft_REG_ADDR_TEMP = 0;
+//const int LM75A_Soft_REG_ADDR_CONF = 1;  // Not used for now
+//const int LM57A_REG_ADDR_THYST = 2; // Not used for now
+//const int LM57A_REG_ADDR_TOS = 3;   // Not used for now
+
+}
+
+using namespace LM75A_SoftConstValues;
+
+LM75A_Soft::LM75A_Soft(){}
+
+void LM75A_Soft::begin(int addr, SoftwareWire *theWire)
+{
+  _i2c_device_address = addr;
+  _wire = theWire;
+  _wire->begin();
+}
+
+float LM75A_Soft::fahrenheitToDegrees(float temperature_in_fahrenheit)
+{
+  return ((temperature_in_fahrenheit - 32.0) / 1.8);
+}
+
+float LM75A_Soft::degreesToFahrenheit(float temperature_in_degrees)
+{
+  return ((temperature_in_degrees * 1.8) + 32.0);
+}
+
+float LM75A_Soft::getTemperatureInFahrenheit() const
+{
+  float temperature_in_degrees = getTemperatureInDegrees();
+
+  if (temperature_in_degrees == INVALID_LM75A_Soft_TEMPERATURE) {
+    return INVALID_LM75A_Soft_TEMPERATURE;
+  }
+
+  return degreesToFahrenheit(temperature_in_degrees);
+}
+
+float LM75A_Soft::getTemperatureInDegrees() const
+{
+  uint16_t real_result = INVALID_LM75A_Soft_TEMPERATURE;
+  uint16_t i2c_received = 0;
+
+  // Go to temperature data register
+  _wire->beginTransmission(_i2c_device_address);
+  _wire->write(LM75A_Soft_REG_ADDR_TEMP);
+  if(_wire->endTransmission()) {
+    // Transmission error
+    return real_result;
+  }
+
+  // Get content
+  if (_wire->requestFrom(_i2c_device_address, 2)) {
+    _wire->readBytes((uint8_t*)&i2c_received, 2);
+  } else {
+    // Can't read temperature
+    return real_result;
+  }
+
+  // Modify the value (only 11 MSB are relevant if swapped)
+  int16_t refactored_value;
+  uint8_t* ptr = (uint8_t*)&refactored_value;
+
+  // Swap bytes
+  *ptr = *((uint8_t*)&i2c_received + 1);
+  *(ptr + 1) = *(uint8_t*)&i2c_received;
+
+  // Shift data (left-aligned)
+  refactored_value >>= 5;
+
+  float real_value;
+  if (refactored_value & 0x0400) {
+    // When sign bit is set, set upper unused bits, then 2's complement
+    refactored_value |= 0xf800;
+    refactored_value = ~refactored_value + 1;
+    real_value = (float)refactored_value * (-1) * LM75A_Soft_DEGREES_RESOLUTION;
+  }
+  else {
+    real_value = (float)refactored_value *  LM75A_Soft_DEGREES_RESOLUTION;
+  }
+
+  return real_value;
+}

arduino-cli/libraries/LM75A_Soft/LM75A_Soft.h

@@ -0,0 +1,65 @@
+/*
+ * \brief I2C LM75A_Soft temperature sensor library
+ *
+ * \author Quentin Comte-Gaz <quentin@comte-gaz.com>
+ * \date 8 July 2016 & 14 January 2018
+ * \license MIT License (contact me if too restrictive)
+ * \copyright Copyright (c) 2016 Quentin Comte-Gaz
+ * \version 1.1
+ */
+
+#ifndef LM75A_Soft_h
+#define LM75A_Soft_h
+
+#if defined(ARDUINO) && ARDUINO >= 100
+#include "Arduino.h"
+#else
+#include "WProgram.h"
+#endif
+
+#include <SoftwareWire.h>
+
+#define INVALID_LM75A_Soft_TEMPERATURE 1000
+
+class LM75A_Soft
+{
+  public:
+    /*!
+     * \brief LM75A_Soft Initialize I2C LM75A_Soft Temperature sensor instance
+     * \param A0_value (bool) A0 Pin value (used for address)
+     * \param A1_value (bool) A1 Pin value (used for address)
+     * \param A2_value (bool) A2 Pin value (used for address)
+     */
+    LM75A_Soft();
+
+    void begin(int addr, SoftwareWire *theWire);
+
+    /*!
+     * \brief getTemperatureInDegrees Get temperature from LM75A_Soft sensor in degrees
+     * \return (float) Sensor temperature in degrees (return INVALID_LM75A_Soft_TEMPERATURE if error happened)
+     */
+    float getTemperatureInDegrees() const;
+
+    /*!
+     * \brief getTemperatureInFahrenheit Get temperature from LM75A_Soft sensor in fahrenheit
+     * \return (float) Sensor temperature in fahrenheit (return INVALID_LM75A_Soft_TEMPERATURE if error happened)
+     */
+    float getTemperatureInFahrenheit() const;
+
+    /*!
+     * \brief fahrenheitToDegrees Convert temperature from fahrenheit to degrees
+     */
+    static float fahrenheitToDegrees(float temperature_in_fahrenheit);
+
+    /*!
+     * \brief degreesToFahrenheit Convert temperature from degrees to fahrenheit
+     */
+    static float degreesToFahrenheit(float temperature_in_degrees);
+
+  private:
+    int _i2c_device_address;
+    SoftwareWire *_wire;
+};
+
+#endif //LM75A_Soft_h
+