初始化提交

arduino-cli/libraries/QDP7SegmentDisplay/QDP7SegmentDisplay.cpp

@@ -0,0 +1,241 @@
+#include "QDP7SegmentDisplay.h"
+
+static uint8_t TubeTab[] = {0x3f, 0x06, 0x5b, 0x4f,
+                           0x66, 0x6d, 0x7d, 0x07,
+                           0x7f, 0x6f, 0x77, 0x7c,
+                           0x39, 0x5e, 0x79, 0x71,
+                           0xbf, 0x86, 0xdb, 0xcf,
+                           0xe6, 0xed, 0xfd, 0x87,
+                           0xff, 0xef, 0xf7, 0xfc,
+                           0xb9, 0xde, 0xf9, 0xf1, 0x00, 0x40};
+
+QDP7SegmentDisplay::QDP7SegmentDisplay(uint8_t port1,uint8_t port2)
+{
+    Clkpin = port1;
+    Datapin = port2;
+    pinMode(Clkpin, OUTPUT);
+    pinMode(Datapin, OUTPUT);
+    set();
+    clearDisplay();
+}
+void QDP7SegmentDisplay::reset(uint8_t port)
+{
+    reset(port);
+    pinMode(Clkpin, OUTPUT);
+    pinMode(Datapin, OUTPUT);
+    set();
+    clearDisplay();
+}
+void QDP7SegmentDisplay::init(void)
+{
+    clearDisplay();
+}
+
+void QDP7SegmentDisplay::writeByte(int8_t wr_data)
+{
+    uint8_t i, count1;
+    for(i = 0; i < 8; i++)  //sent 8bit data
+    {
+        digitalWrite(Clkpin, LOW);
+        if(wr_data & 0x01)digitalWrite(Datapin, HIGH); //LSB first
+        else digitalWrite(Datapin, LOW);
+        wr_data >>= 1;
+        digitalWrite(Clkpin, HIGH);
+
+    }
+    digitalWrite(Clkpin, LOW); //wait for the ACK
+    digitalWrite(Datapin, HIGH);
+    digitalWrite(Clkpin, HIGH);
+    pinMode(Datapin, INPUT);
+    while(digitalRead(Datapin))
+    {
+        count1 += 1;
+        if(count1 == 200)//
+        {
+            pinMode(Datapin, OUTPUT);
+            digitalWrite(Datapin, LOW);
+            count1 = 0;
+        }
+        //pinMode(Datapin,INPUT);
+    }
+    pinMode(Datapin, OUTPUT);
+
+}
+//send start signal to TM1637
+void QDP7SegmentDisplay::start(void)
+{
+    digitalWrite(Clkpin, HIGH); //send start signal to TM1637
+    digitalWrite(Datapin, HIGH);
+    digitalWrite(Datapin, LOW);
+    digitalWrite(Clkpin, LOW);
+}
+//End of transmission
+void QDP7SegmentDisplay::stop(void)
+{
+    digitalWrite(Clkpin, LOW);
+    digitalWrite(Datapin, LOW);
+    digitalWrite(Clkpin, HIGH);
+    digitalWrite(Datapin, HIGH);
+}
+
+
+void QDP7SegmentDisplay::display(uint16_t value)
+{
+    display((int)value);
+    // display((double)value,0);
+}
+
+void QDP7SegmentDisplay::display(int16_t value)
+{
+    display((double)value, 0);
+}
+
+void QDP7SegmentDisplay::display(double value, uint8_t digits)
+{
+
+
+AA:
+    int8_t buf[4] = {' ', ' ', ' ', ' '};
+    int8_t tempBuf[4];
+    uint8_t b = 0;
+    uint8_t bit_num = 0;
+    uint8_t  int_num = 0;
+    uint8_t isNeg = 0;
+    double number = value;
+    if (number >= 9999.5 || number <= -999.5);
+    else
+    {
+        // Handle negative numbers
+        if (number < 0.0)
+        {
+            number = -number;
+            isNeg = 1 ;
+        }
+        // Round correctly so that print(1.999, 2) prints as "2.00"
+        double rounding = 0.5;
+        for (uint8_t i = 0; i < digits; ++i)
+            rounding /= 10.0;
+        number += rounding;
+
+        // Extract the integer part of the number and print it
+        uint16_t int_part = (uint16_t )number;
+        double remainder = number - (double)int_part;
+        do
+        {
+            uint16_t m = int_part;
+            int_part /= 10;
+            char c = m - 10 * int_part;
+            tempBuf[int_num] = c;
+            int_num++;
+        }
+        while(int_part);
+
+        bit_num = isNeg + int_num + digits;
+
+        if(bit_num > 4)
+        {
+            bit_num = 4;
+            digits = 4 - (isNeg + int_num);
+            goto AA;
+        }
+        b = 4 - bit_num;
+        if(isNeg)buf[b++] = 0x21;
+
+        for(uint8_t i = int_num; i > 0; i--)buf[b++] = tempBuf[i-1];
+        // Print the decimal point, but only if there are digits beyond
+        if (digits > 0)
+        {
+            buf[b-1] += 0x10;
+            // Extract digits from the remainder one at a time
+            while (digits-- > 0)
+            {
+                remainder *= 10.0;
+                int toPrint = int(remainder);
+                buf[b++] = toPrint;
+                remainder -= toPrint;
+            }
+        }
+    }
+    display(buf);
+}
+
+void QDP7SegmentDisplay::write(int8_t SegData[])
+{
+    uint8_t i;
+    start();          //start signal sent to TM1637 from MCU
+    writeByte(0x40);
+    stop();
+    start();
+    writeByte(Cmd_SetAddr);
+    for(i = 0; i < 4; i ++)
+    {
+        writeByte(SegData[i]);
+    }
+    stop();
+    start();
+    writeByte(Cmd_DispCtrl);
+    stop();
+}
+void QDP7SegmentDisplay::write(uint8_t BitAddr, int8_t SegData)
+{
+    start();          //start signal sent to TM1637 from MCU
+    writeByte(0x44);
+    stop();
+    start();
+    writeByte(BitAddr | 0xc0);
+    writeByte(SegData);
+    stop();
+    start();
+    writeByte(Cmd_DispCtrl);
+    stop();
+}
+void QDP7SegmentDisplay::display(int8_t DispData[])
+{
+    int8_t SegData[4];
+    uint8_t i;
+    for(i = 0; i < 4; i ++)
+    {
+        SegData[i] = DispData[i];
+    }
+    coding(SegData);
+    write(SegData);
+}
+//******************************************
+void QDP7SegmentDisplay::display(uint8_t BitAddr, int8_t DispData)
+{
+    int8_t SegData;
+
+    if((DispData >= 'A' && DispData <= 'F'))DispData = DispData - 'A' + 10;
+    else if((DispData >= 'a' && DispData <= 'f'))DispData = DispData - 'a' + 10;
+    SegData = coding(DispData);
+    write(BitAddr, SegData); //
+}
+
+void QDP7SegmentDisplay::clearDisplay(void)
+{
+    int8_t buf[4] = {' ', ' ', ' ', ' '};
+    display(buf);
+}
+//To take effect the next time it displays.
+void QDP7SegmentDisplay::set(uint8_t brightness, uint8_t SetData, uint8_t SetAddr)
+{
+    Cmd_SetData = SetData;
+    Cmd_SetAddr = SetAddr;
+    Cmd_DispCtrl = 0x88 + brightness;//Set the brightness and it takes effect the next time it displays.
+}
+
+
+void QDP7SegmentDisplay::coding(int8_t DispData[])
+{
+    //  uint8_t PointData = 0;
+    for(uint8_t i = 0; i < 4; i ++)
+    {
+        DispData[i] = TubeTab[DispData[i]];
+    }
+}
+int8_t QDP7SegmentDisplay::coding(int8_t DispData)
+{
+    //  uint8_t PointData = 0;
+    DispData = TubeTab[DispData] ;//+ PointData;
+    return DispData;
+}

arduino-cli/libraries/QDP7SegmentDisplay/QDP7SegmentDisplay.h

@@ -0,0 +1,34 @@
+#include "Arduino.h"
+#ifndef QDPQDP7SegmentDisplay_H
+#define QDPQDP7SegmentDisplay_H
+
+class QDP7SegmentDisplay
+{
+public:
+    QDP7SegmentDisplay(uint8_t port1,uint8_t port2);
+    void init(void);        //To clear the display
+    void set(uint8_t = 2, uint8_t = 0x40, uint8_t = 0xc0); //To take effect the next time it displays.
+    void reset(uint8_t port);
+    void write(int8_t SegData[]);
+    void write(uint8_t BitAddr, int8_t SegData);
+    void display(uint16_t value);
+    void display(int16_t value);
+    void display(double value, uint8_t = 1) ;
+    void display(int8_t DispData[]);
+    void display(uint8_t BitAddr, int8_t DispData);
+    void clearDisplay(void);
+private:
+    uint8_t Cmd_SetData;
+    uint8_t Cmd_SetAddr;
+    uint8_t Cmd_DispCtrl;
+    boolean _PointFlag;     //_PointFlag=1:the clock point on
+    void writeByte(int8_t wr_data);//write 8bit data to tm1637
+    void start(void);//send start bits
+    void stop(void); //send stop bits
+    void point(boolean PointFlag);//whether to light the clock point ":".To take effect the next time it displays.
+    void coding(int8_t DispData[]);
+    int8_t coding(int8_t DispData);
+    uint8_t Clkpin;
+    uint8_t Datapin;
+};
+#endif